Table of Contents
Advertisement
jector. Refer to Figure 2-23 and Figure 2-24 (shown are models with internal outlets for North Amer-
ica, etc.).
F
F
IGURE
NOTE: The DVI ports, shown in Figure 2-24, are single-link ports for single-link cable/connectors
only. Connect two independent sources, or connect the Cine-IPM 2K to both ports for 10-bit
processing. Using this pair of ports as a dual-link pair requires a special adapter (not available).
• If Internal: Sources/servers are often rack-mounted in the projector rear, with cabling routed
directly to the underside of the projection head. Refer to Figure 2-25 and Figure 2-26 (shown are
models with internal outlet for North America, etc.).
To Install:
CP2000 Setup Guide
020-100070-01 Rev. 1 (10/08)
2-23 C
IGURE
ONNECTING AN
2-24 C
ONNECTING AN
E
C
S
XTERNAL
INEMA
ERVER
E
N
-C
XTERNAL
ON
INEMA
Section 2: Installation and Setup
/S
OURCE
(DVI) S
OURCE
2-17
Hide quick links:
Advertisement
Table of Contents
