Maintenance; Warnings And Guidelines; Labels And Markings; General Precautions - Christie CP2000 Setup Manual

4 Maintenance

This projector is designed for safe and reliable operation. However, safe operation is not assured by
design alone; installers, service technicians, trained operators and all other users must maintain a safe
environment at all times. Please read through and understand all warnings and precautions before
attempting to operate the projector.
4.1

WARNINGS AND GUIDELINES

4.1.1 LABELS AND MARKINGS

Observe and follow any warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle indicates related operating/
maintenance instructions in the documentation accompanying the projector.
The lightning flash and arrowhead symbol within the equilateral triangle indicates
non-insulated "dangerous voltage" within the projector's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.

4.1.2 GENERAL PRECAUTIONS

Never look directly into the projector lens or at the lamp. The extreme high brightness
can cause permanent eye damage.
Position all cables where they cannot contact hot surfaces or be pulled or tripped over.
Opening or removing a projector cover requires a qualified service technician.
For protection from ultraviolet radiation, keep all projector housings intact during
operation. Protective clothing and safety goggles are recommended.
NOTES: 1) The American Conference of Governmental Industrial Hygienists (ACGIH) recommends
occupational UV exposure for an 8-hour day to be less than 0.1 microwatts per square centimeters of
effective UV radiation. An evaluation of your workplace is advised to assure employees are not
CP2000 Setup Guide
020-100070-01 Rev. 1 (10/08)
WARNING
WARNING
4-1