Table of Contents
Advertisement
Position the brake hose on the master
cylinder such that it is pointing downwards
correctly and tighten with the banjo bolt.
Replace the banjo bolt sealing washers
whenever the bolt is removed.
Tighten the banjo bolt firmly
Torque 3.5 KG-M.
Connect the brake light switch.
Fill the brake fluid till "MAX" mark and bleed
the system.
Assemble the diaphragm, plate and cover.
Tighten screws gently
Torque 0.15 KG-M.
Assemble the rear view mirror.
DISASSEMBLY OF
DISASSEMBL
DISASSEMBL
DISASSEMBL
DISASSEMBL
CALIPER
CALIPER
CALIPER
CALIPER
CALIPER
Disconnect the brake Hose by removing
the Banjo bolt and sealing washers.
Y OF WHEEL
Y OF
Y OF
WHEEL
WHEEL
WHEEL
Y OF
WHEEL
Remove the Grub screws.
Loosen both the pin bolts
Loosen and remove the 2 mounting bolts
holding the caliper to the fork and remove
the caliper assembly
07-12
Advertisement
Table of Contents
