Royal Enfield Bullet Classic EFI Service Manual page 219

Hide thumbs Also See for Bullet Classic EFI:
Table of Contents

Advertisement

Observation
Complaint : Brakes Poor
Complaint : Vehicle Wobbles
Complaint : Electricals
Bulbs do not light
Complaint : Electric start not working
Causes
Burrs in splined position of the shaft
Improper position of the return spring.
Improperly adjusted brakes
Front brake Disc Warped/Scored
Brake linings worn / Uneven wear
Brake drum scored / Uneven wear
Wheel rim runout
Loose / Broken spokes
Tyres not fitted correctly
Wheels misaligned
Under inflated tyres
Loose / improper connection
Bulb fused
Fuse blown
Switch defective
Switch defective
Flasher defective
Battery discharged fully
MIL Glowing Continuously
Loose Electrical connections
Neutral indicator not glowing
Clutch Switch Defective
Side Stand Switch Defective
E start Motor not working
Remedies
Check and Replace
Check and Replace
Check & Correct
Check & Correct
Check & Correct
Check & Correct
Check & Correct
Tighten / Replace spokes
Refit tyres correctly
Ensure proper alignment
Inflate to correct pressure
Check & Correct
Check & Correct
Check & Correct
Check & Correct
Check & Correct
Check & Correct
Check & Recharge
Check & Correct
Check & Correct
Bring the vehicle in neutral
Check & Replace
Check & Replace
Check & Replace
10-6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bullet electra efiBullet efi

Table of Contents