Table of Contents
Advertisement
PREPARATION FOR SERVICE
Good preparation is very important for carrying out correct service job. The motorcycle should be
cleaned well before starting a repair job. Cleaning will occasionally uncover sources of trouble.
Availability of tools, measuring instruments and parts should be ensured before commensing an
overhaul, since Interruption to locate tools or parts can cause distraction and needless delay. Use of
special tools will ensure a quality service.
USE OF GENUINE SPARE PARTS
Use only genuine Royal Enfield spares whenever replacing parts. Use of non genuine parts can
seriously affect motorcycle performance and may result in costly rework, vehicle down time and
above all customer dissatisfaction.
NOTE :
Proper service and repair is important for the safe and reliable operation of all mechanical products.
The service procedures recommended and detailed in this manual will help to carry out correct repairs.
SAFETY
Every care is taken to ensure that the information given in this manual is correct at the time of going to
print. However, Royal Enfield does not assume responsibility for any damage, loss or injury caused to
the vehicle or to the person carrying out repairs, due to errors or omissions in this manual.
IMPORTANT NOTICE
All images shown are only for reference to explain and may not be exactly the same on the motorcycle.
Technical specifications are subject to change without prior notice.
Because of changes that may occur in the manufacturing process, since this manual was printed, it
is possible some instructions or illustrations found within this manual may differ from those found on
the vehicle. However the technical information found within this manual is correct at the time, when it
was approved for printing.
Future modifications, improvements etc will be communicated to our Authorised Distributors / Importers
as and when changes are done to the motorcycle.
FOREWORD
FOREW
FOREW
FOREW
FOREW
ORD
ORD
ORD
ORD
01-2
Advertisement
Table of Contents
