Similarly follow the same process to
assemble the exhaust Valve as shown in
Fig.
NOTE:
Please ensure split collars are locked
on the valve stem groove by tapping
gently with a plastic hammer on
retainer spring.
VALVE LEAKAGE TEST
Pour solvent into exhaust port and check
for valve seat leakage if any.
Similarly check for inlet valve seat leakage.
Assemble the Cylinder head assy. on the
Barrel.
Tighten the 6 flanged hex nuts diagonally
and evenly.
Assemble the spark plug
Check run out of the push rods.
05-68