Royal Enfield Bullet Classic EFI Service Manual page 104

Remove gear lever shaft bush and oil seal.
COMPONENTS DISMANTLING COMPONENTS DISMANTLING COMPONENTS DISMANTLING COMPONENTS DISMANTLING COMPONENTS DISMANTLING
ON CRANK ON CRANK CASE LH CASE LH
ON CRANK ON CRANKCASE LH ON CRANK CASE LH CASE LH
REMOVAL OF CLUTCH ASSY.
Remove clutch push pad, ball bearing &
bearing retainer cup.
Remove auto chain tensioner bottom pin
bolt, "O"ring and spring. Unlock clip and
press push rod to slacken duplex chain.
Use Special tool No. ST - 25591-4 Clutch
centre nut holding tool to lock Clutch outer
sprocket and engine drive sprag clutch.
Remove nyloc nut & plain washer.
Remove 17mm Hex bolt on the Engine
sprocket.
05-22