Table of Contents
Advertisement
Assemble neutral switch with packing.
Locate the crankcase on the frame and fit
the front engine mounting stud.
Fit the rear engine mounting stud.
Fit the centre stand and foot rest supports.
Ensure the woodruf key is located correctly
on the jack shaft and fix the circlip.
NOTE :
Ensure step face of jack shaft gear
should face inside (Towards Crank
case LH)
Locate the double gear for starter drive in
the crankcase and insert shaft. Ensure cut
portion of shaft is facing upwards.
CUT PORTION
05-49
Advertisement
Table of Contents
