Table of Contents
Advertisement
Remove sprocket drum assy. from the
swing arm along with brake shoes and
cover plate carefully. Disconnect chain if
not removed earlier.
Take out sprocket drum, brake shoes,
and spacer
Remove the oil seal.
Drive out the bearing from the hub
sprocket.
CLEANING
Clean all parts except brake shoes, cush
drive and tyre, with solvent and dry with
compressed air.
Clean the brake shoe & cush drive with
dry cloth / cloth wet with solvent.
INSPECTION
Visually check all parts for breaks, cracks,
dents, scoring, glazing or any other
damage.
Check bearings for free rotation, axial play
and radial clearance. Replace if necessary.
Lubricate bearing by MP grease and then
assemble into sprocket drum by using
bearing punch as shown in Fig.
Check the spindle for bend as shown in
Fig.
ASSEMBLY
Assemble in the reverse order of
disassembly.
While assembling replace the grease seals
and split pin.
07-19
Advertisement
Table of Contents
