Brake Cam Greasing; Brake Pedal Play Adjustment; Rear Shock Absorbers Adjustment - Royal Enfield Bullet Classic EFI Service Manual

Hide thumbs Also See for Bullet Classic EFI:
Table of Contents

Advertisement

Rotate the wheel and apply brake and
tighten all the nuts and lock the split pin.

BRAKE CAM GREASING

(EVERY 6,000 KMS)
Remove the brake cover plate.
Clean the brake cam and apply grease.
Refit the cover plate.

BRAKE PEDAL PLAY ADJUSTMENT

PEDAL FREE PLAY 20 TO 30 MM
Turn in/out the adjuster nut for correct pedal
play
REAR SHOCK ABSORBERS
ADJUSTMENT
The rear shock absorber spring preload can
be increased or reduced according to road
and load conditions.
Increase the spring preload for high load
operation.
Reduce the spring preload for low load
operation.
The adjuster provided on the bottom of the
spring has five notches.
To carry out the adjustment proceed as
follows :
-Using special tool, place it on the slot
provided on the adjuster.
-Turn the adjuster such that the adjuster
moves up to increase the spring preload
and vice versa to reduce the spring preload.
03-16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bullet electra efiBullet efi

Table of Contents