Royal Enfield Bullet Classic EFI Service Manual page 136

Fix the washer and nyloc hex nut 24 mm
over clutch assembly and tighten.
Use Torque wrench to tighten the nyloc nut
on Clutch (Torque 4.2 KG-M).
Fix the spring and bolt with "O" ring for the
auto chain tensioner (Torque 1 KG-M).
Assemble clutch bearing cup, ball bearing
(6001) & clutch push pad.
Assemble gear lever shaft bush.
Assemble gear lever oil seal on cover LH .
05-54