Table of Contents
Advertisement
Fix Cam steady plate and check for axial
play of Cam Gears to avoid noise problem.
Assemble the dowels and allen screws on Cam
steady plate and tighten (Torque 1 KG-M).
Assemble magneto rotor, plain washer and
nut and tighten (Torque 4.8 KG-M).
NOTE :
Use special tool No. ST 25592-4 to lock
connecting rod movement during
tightening magneto nut.
Fix oil seal 2 Nos. at Kick Shaft hole on
Crank case RH cover.
OUTSIDE OIL SEAL
Fix breather chamber gasket.
Assemble 6 allen screws to fix breather
chamber cover plate (Torque 0.60 KG-M).
INSIDE OIL SEAL
05-59
Advertisement
Table of Contents
