Assembly Of Clutch - Royal Enfield Bullet Classic EFI Service Manual

Assemble collar on main shaft (distance
collar on Crankcase LH).
ASSEMBL ASSEMBL Y OF CL Y OF CL
ASSEMBLY OF CL ASSEMBL ASSEMBL Y OF CLUT Y OF CL
Assemble needle roller Bearing ( SCE 228-
C3) in the clutch sprocket and locate the
thrust washer.
Assemble clutch friction plate over clutch
hub and then clutch plain plate. Similarly
follow the same to sub assemble all the
clutch plates.
CAUTION :
UT UT CH CH
UT UTCH CH CH
Ensure smooth face of all clutch plain
plates are kept in the same direction to
avoid clutch jerk / slippage.
Assemble wheel clutch on clutch hub.
Insert clutch sub assy. into clutch sprocket.
after placing the thrust washer.
Assemble clutch springs 6 Nos. on clutch
sub assy. then place clutch spring holder.
05-52