Royal Enfield Bullet Classic EFI Service Manual page 86

SEA SEA SEA SEAT REMO SEA T REMO T REMO T REMO T REMOV V V V V AL B AL B AL B AL BULLET AL B
ELECTRA EFI (E5/G5) ELECTRA EFI (E5/G5) ELECTRA EFI (E5/G5)
ELECTRA EFI (E5/G5) ELECTRA EFI (E5/G5)
Remove 4 nos. flange bolts from both sides
of the seats.
Remove the pillion holder, lift from the rear
end and pull out the seat
B B B B B ULLET CLASSIC EFI (C5) ULLET CLASSIC EFI (C5) ULLET CLASSIC EFI (C5) ULLET CLASSIC EFI (C5) ULLET CLASSIC EFI (C5)
Remove the mounting bolts as shown and
remove the seat.
Manual Bi starter
ULLET ULLET ULLET ULLET
Remove the 2 screws, at the bottom of the
LH switch module and separate the
module from the handle bar.
Disconnect the cable from the lever.
Remove cable from the straps in the
frame.
05-4