[Ata] Multi-Zone Overhead Paging - AT&T Synapse User Manual

[ATA] Multi-Zone Overhead Paging

If your Synapse system includes an optional multi-zone overhead paging (OHP) system, you have an Overhead Paging option
in the paging zones list.
To page using an optional multi-zone overhead paging system:
Paging Zones
1. All Extensions
2. Accounts
3. Design
4. Documentation
5. Management
6. Overhead Paging
Use or to scroll then press
SELECT or press digit.
Start
Figure 324. Overhead Paging Zone
Page
Overhead Page
You may be required to enter additional
digits before paging can begin.
Press EndPage when done.
Figure 325. Multi-Zone Overhead
Page
Paging
Synapse User's Guide
1. From Idle or from a held call, press
It may be necessary to first press
from Hold.
The paging zones screen displays, as shown in Figure 324.
2. Select Overhead Paging.
3. Press
Quick
shown in Figure 325.
Dial
If necessary, enter the desired overhead paging zone number.
4. Wait for feedback from your paging system, then speak into the speakerphone or
pick up the corded handset to speak.
5. When finished, press
to the Idle screen.
EndPage
. The system displays the multi-zone overhead page screen, as
, hang up the handset, or press SPEAKER. You return
235
, as shown in Figure 319 on page
from Idle, or to press
232.
, then