Deskset Dial-Pad Entry - AT&T Synapse User Manual

Deskset Dial-Pad Entry

Use the dialing keys to enter alphabetical characters into a text field. Digits 2, 3, 4, 5, 6, and 8 have three assigned letters, while
digits 7 and 9 have four assigned letters, as shown in Figure 11. The keys function as follows:
1. Pressing the dialing key once enters the upper case first letter on the key.
2. Pressing the dialing key twice enters the upper case second letter on the key.
3. Pressing the dialing key three times enters the upper case third letter on the key.
4. Pressing the dialing key four times enters the number, or the upper case fourth letter for
keys 7 and 9 that require an additional press to cycle into lower case letters.
5. Pressing the dialing key five times enters the lower case first letter on the key.
6. Pressing the dialing key six times enters the lower case second letter on the key.
7. Pressing the dialing key seven times enters the lower case third letter on the key.
8. Pressing the key further cycles through the letters again.
The # and * keys have been assigned special characters, as shown in Figure 12. Repeatedly
pressing these keys cycles through each special character in the order shown.
Overview
Synapse User's Guide
Deskset Special Characters
Key Press 1st 2nd
'
# #
* *
?
Figure 12. Deskset Special Character Assignment
3rd 4th 5th
,
– .
! / (
28
1 2
ABC DEF
4 5
GHI JKL MNO
8
7
PQRS TUV WXYZ
*
0
OPER
Figure 11. Dial Pad
6th
&
)
3
6
9
#