Operation
Speakerphone operation
Speakerphone paging
On the telephone base the speakerphone is registered to, press
/HANDSET LOCATOR or /FIND HANDSET to page the
speakerphone and all system devices. The speakerphone plays
the paging tone regardless of its ringer volume setting and the
CHARGE light flashes red and green.
To mute the paging tone:
• Press MUTE or VOL– on the speakerphone.
To end paging:
• Press
/HANDSET LOCATOR or /FIND HANDSET on the
telephone base.
-OR-
• Press PHONE on the speakerphone.
NOTE: If there is no response after 60 seconds, the paging ends.
16