To add parties to a call (max. 4 parties plus you):
1. Call the first party (can use Speed Dial or Auto Dial buttons).
Telephone or
2. After the first party answers, press [
Extension Number +
[
] +
Conf
3. Press an idle line button and call the second party (or press [
Telephone or
Extension Number +
4.
[
]
Conf
To drop the last outside party added to the call:
1. Press [
To Drop:
[
] [
] [
]
NOTE: You cannot add more than 2 outside parties, transfer a
Feature
0
6
conference call, or join a conference call.
Joining a Call
To connect yourself to an outside call being conducted at
another extension:
1. Press the line button (steady red light) or dial [
[
]
Line
or
[
] [
] [
] +
2. Lift the handset.
Intercom
6
8
NOTE: You cannot join an inside call, a conference call, or a call at an
Line Number (01–12)
extension with Privacy turned on.
To call everyone in a Calling Group* who is not busy on another
call:
Ringing Call:
1.
[
] [
] +
Intercom
7
Group Number (1–4)
2.
3.
Paging Call:
[
] [ ] [
] +
Intercom
7
Group Number (1–4)
To make an announcement over the loudspeaker paging
system (if one is connected to your system):
1. Press [
[
] [
] [
]
Intercom
7
0
2. Lift handset.
3. Dial [
* Calling Group, Pickup Group, and Hunt Group extensions are listed on a separate form. See your
System Manager.
Making a Conference Call
and extension number to add an inside party).
After the second party answers, press [
connected with both parties. To add others, repeat steps 2–4.
The lights at all extensions in the conference flash red and green.
] [
] [
].
Feature
0
6
two-digit line number (01–12).
Making a Call to a Calling Group
Press [
].
Intercom
Lift handset.
Dial [
] and a group number to ring the group, or press [ ] [
7
a group number to page those in the group who have MLS–model
phones with speakers.
You are connected to the first extension to answer.
Loudspeaker Paging
].
Intercom
] [
], then make your announcement.
7
0
1
].
Conf
Intercom
] again; you are
Conf
] [
] [
] and the
Intercom
6
8
7
]
] plus
Need help?
Do you have a question about the MLS-34D and is the answer not in the manual?
Questions and answers