[Headset] Cordless Headset Operation - AT&T Synapse User Manual

[Headset] Cordless Headset Operation

Table 7. TL7600 Cordless Headset Operation
Function Description
Ringtone silencing
Volume control
Mute
Answering a call
Ending a call
Auto off
Overview
Synapse User's Guide
Operation
Press MUTE/
FLASH
Headset earpiece. This silences the ringtone without
disconnecting the call. The next incoming call rings normally at
the preset volume.
The Headset does not have an external ringer. When you
receive calls, the Headset earpiece plays a ringtone.
While on a call, press the VOLUME +/– keys on the side of the
Headset to adjust the listening volume.
Press MUTE/
FLASH
When mute is on, there is a short beep every 10 or 15 seconds
until mute is turned off. The SB67030 Deskset does not support
the flash feature.
The MUTE button on the Deskset does not mute the
Cordless Headset.
Press ON/ on the Headset.
OFF
Press /OFF on the Headset.
ON
A call ends automatically when you put the Headset in the
charger.
51
to temporarily silence the ringtone in the
to turn the Headset microphone on or off.