[Headset] Cordless Headset Description - AT&T Synapse User Manual

[Headset] Cordless Headset Description

The registration process described in the manual that comes with the Cordless Headset is not appropriate for the
SB67030 Deskset, which has a different process. The correct process is described in
Headset:" on page
ON/OFF
Press to make and/or
answer a call, and to
end a call.
The light is on when the
Headset is charging in
the Headset charger.
The light flashes slowly
when you are on a call
and flashes quickly
when there is an
incoming call.
NOTE: To answer a call
while you are already on
a call, press ON/ . The
OFF
first call is dropped.
Press ON/ to answer
OFF
the next call.
Overview
Synapse User's Guide
89.
Figure 29. TL7600 Cordless Headset Features
50
"To register the TL7600 Cordless
Earpiece
VOLUME +/–
Press the volume key on the side
of the Headset to adjust the
listening volume when on a call.
MUTE/FLASH
Press to mute the microphone
during a call. The Headset beeps
every 10 or 15 seconds while
you are on hold.
Press to mute the ringtone in the
earpiece when there is an
incoming call.
FLASH is inoperative with the
SB67030 Deskset.
Battery Cover
Open to install or replace the
battery.