Incoming Call Indication - AT&T Synapse User Manual

Incoming Call Indication

To answer a call from Idle mode:
INCOMING CALL
Graham Bell
2325550176
Lif t receiv er, or press Answer, SPEAKER,
HEADSET, or f lashing Call Appearance.
Answ er Ignore Fw dVM
Figure 257. Incoming Call with No
Other Calls
12:30PM Thu Feb 23 2008
Angela Marti 9-1-732-555-7318 5:01
Graham Bell 232-555-0176
Transfer Transfer Conf Park
Figure 258. Incoming Call with an
Existing Call
Incoming Calls
Synapse User's Guide
When there is an incoming call:
The Deskset rings. See
When there are no active or held calls, an incoming call screen displays,
as shown in Figure 257.
When there are active or held calls, or you are live dialing, an incoming
call screen displays, as shown in Figure 258. The incoming call is
highlighted and a flashing bell icon displays next to the call information.
(Graham Bell is the caller in Figure 258).
If you are on an active call or live dialing, there is a single, short ring.
Other actions during incoming calls:
If there is more than one incoming call, all calls remain in the display until
you press
For multiple incoming calls, press the corresponding Call Appearance key
to answer a call.
If you are in Voicemail review, pressing
message playback to continue.
Quick
To see incoming call notifications on the Cordless Handset, see
Dial
Call Indication" on page
More 1/2
[ATA] If you have an analog telephone such as a conference phone connected via an
optional Analog Terminal Adapter (ATA), Incoming calls will ring. If the telephone
supports caller ID features, any caller ID information will be displayed.
"Sounds" on page
.
202.
194
69.
or allows
"[Handset] Incoming