Remove A Battery From The X100 - Gatewing X100UAS System Manual

2 Place the fully charged battery in the battery compartment of the payload bay.
3 Connect the main power connector of the battery to the X100.
S R
TEP
connected.
R :
The X100 is in STANDBY mode.
ESULT

12.10 Remove a battery from the X100

P
REREQUISITES
● X100 body with mounted battery
1 Remove the top cover from the payload bay of the X100 body.
2 Disconnect the main power connector of the battery from the X100.
3 Remove the battery from the battery compartment in the payload bay.
2.0
Remove a battery from the X100
:
The eBox will generate a confirmation tone to indicate the battery is
ESULT
— 98 —
Battery
12 October 2012