4
Connect the charger cable of the Graupner Ultramat 14 plus charger to the main power
connector of the X100 battery.
W
ARNING
5
Hold down the Enter/Start button for two seconds.
S
R
TEP
12.8 Disconnect a charged battery
P
REREQUISITES
●
Graupner Ultramat 14 plus charger with charged X100 battery
When a battery is fully charged, the Graupner Ultramat 14 plus charger produces an audible
signal and stops charging automatically.
●
You can leave the battery connected to the battery charger for as long as you want to. It
will not discharge.
●
If you want to stop the charging process for whatever reason, you can also follow this
procedure.
1
Press the Enter/Start button twice.
2.0
Disconnect a charged battery
: Mind the polarity.
:
The charging process starts automatically.
ESULT
— 96 —
Battery
12 October 2012