Seal The Payload Bay With The Top Cover; Launch; Assemble The Launcher - Gatewing X100UAS System Manual

19.5.6

Seal the payload bay with the top cover

P
REREQUISITES
● X100 body
● Top cover with plastic screw
● Flat-bladed screwdriver
1 Make sure no connectors or cables are hanging over the edge of the payload bay.
2 Place the top cover on the payload bay of the X100 body.
3 Using the flat-bladed screwdriver, secure the top cover with the plastic screw.
C
AUTION

19.6 Launch

19.6.1

Assemble the launcher

P
REREQUISITES
● Launcher bag
● Launch area
2.0
Prepare for flight
Launch
: Tighten it hand-tight, do not overstrain.
— 165 — 12 October 2012