3
Check if the propeller blades are still firmly attached to the propeller.
●
The propeller blades must be facing backwards.
●
The screws on the tips of the propeller blades must be tightened but the blades must
still be able to move.
19.2.7
Mount an eBox in the X100
P
REREQUISITES
●
X100 body
●
eBox
●
Ratcheting screwdriver
●
2 nylon screws
The eBox must be mounted correctly in the body of the X100.
1
Connect the pressure connector of the eBox to the pressure tube.
2
Plug the eBox onto the eBox connector in the eBox bay.
3
Using the screwdriver, secure the eBox with the two screws.
19.2.8
Prepare the GCS for flight
P
REREQUISITES
●
Trimble tablet PC GCS
●
Gatewing modem
2.0
Prepare for flight
Checks and preparations
— 148 —
12 October 2012