Disassemble The Launcher - Gatewing X100UAS System Manual

21.3.3

Disassemble the launcher

P
REREQUISITES
● Crank
Once the flight is done, you can disassemble the launcher.
1 Fix the crank between your ties.
2 Release the force with the crank very gently while pulling the release handles upwards.
Make sure you counteract the force on the elastics. It might be possible that you have to
tighten the elastics a little bit so that you are able to pull the release handles upwards.
C
AUTION
system so the forces can be released gently.
2.0
After the flight
Clearing the site
: It is recommended that a second person connects the crank to the tightening
— 187 — 12 October 2012