Mount The X100 On The Launcher - Gatewing X100UAS System Manual

9 Place the launcher into the prevailing wind direction.
19.6.2

Mount the X100 on the launcher

P
REREQUISITES
● Assembled launcher
● X100 ready for flight
● Crank (or torque wrench if available)
It is important to mount the launcher in a correct way to ensure a proper launch and take-off.
W
ARNING
1 Make sure the safety pin is properly inserted in the launch dock and launch slide.
2.0
Prepare for flight
Launch
: Never perform a launch when the launcher is armed without the X100.
— 170 — 12 October 2012