Entry
A
B
C
D
E
8.2
Mount an eBox in the X100
P
REREQUISITES
●
X100 body
●
eBox
●
Ratcheting screwdriver
●
2 nylon screws
The eBox must be mounted correctly in the body of the X100.
1
Connect the pressure connector of the eBox to the pressure tube.
2
Plug the eBox onto the eBox connector in the eBox bay.
3
Using the screwdriver, secure the eBox with the two screws.
8.3
Remove an eBox from the X100
P
REREQUISITES
●
X100 with mounted eBox
●
Ratcheting screwdriver
The eBox must be removed correctly from the X100.
1
Remove the two screws securing the eBox in the eBox bay.
2
Unplug the eBox from the eBox connector.
3
Disconnect the pressure connector from the pressure tube.
2.0
eBox
Mount an eBox in the X100
RF connector
• Green ON LED
• CONTROL button
• Red READY LED
GPS connector
Pressure connector
eBox connector
— 60 —
Part
12 October 2012