Put The X100 In Standby Mode; Put The X100 In On Mode - Gatewing X100UAS System Manual

Mode
OFF
STANDBY
ON
ARMED
DOWNLOAD
ERROR
8.5

Put the X100 in STANDBY mode

P
REREQUISITES
● Fully charged battery
● X100 prepared for flight with eBox in OFF mode
The X100 is in OFF mode when the battery is not connected. None of the LEDs on the eBox
are lit.
1. Connect the main power connector of the battery to the X100.
R :
The X100 is in STANDBY mode. On the eBox, the READY LED is blinking.
ESULT
8.6

Put the X100 in ON mode

P
REREQUISITES
● X100 prepared for flight with eBox in STANDBY mode
● Fixed GPS position
● Radio link between GCS and X100
2.0
eBox
Put the X100 in STANDBY mode
The battery is not connected.
The battery is connected.
The sensors and general settings are initialized.
The aircraft is ready for launch.
The data from the camera in the aircraft can be downloaded.
An error occurred.
— 62 —
Description
12 October 2012