Monitor The Landing; End A Flight - Gatewing X100UAS System Manual

17.12 Monitor the landing

P
REREQUISITES
● X100 in the air, ready for landing
● Wireless link between GCS and X100 (LINK field green)
Once the X100 starts landing, a dialog appears in Horizon, showing the landing circuit that will
be followed. This is accompanied by an audible signal.
1 Click Acknowledge Circuit to acknowledge that the X100 is landing according to the
defined landing circuit.
2 Monitor the landing of the X100 in Horizon.
3 Keep visual contact with the X100 during the entire landing.
4 Check the obstacle clearances during the final leg of the landing and press the GS_UP
button if necessary to avoid collisions.

17.13 End a flight

P
REREQUISITES
● landed X100 after a flight
● Wireless link between GCS and X100 (LINK field green)
Once the X100 has performed the flight project and landed, you have to end the flight in
Horizon.
1. Click Terminate to end the flight.
R :
The flight is ended in Horizon.
ESULT
2.0
Horizon
Monitor the landing
— 131 — 12 October 2012