LINK field
The LINK field in Horizon indicates the link status between the GCS and X100.
This field can have the following values:
Message
LINK
LINK
17.5 Upload the flight plan to the X100
P
REREQUISITES
●
GCS with prepared for flight with:
○
Flight plan exported to Horizon
○
Modem connected
○
No wireless link established between GCS and the X100 autopilot. Restart Horizon to
kill any established links.
●
X100:
○
With data link antenna mounted
○
With GPS antenna not mounted
○
In ON mode
N
: When establishing a wireless link, it is important that the modem is connected to the
OTE
GCS before a charged battery is mounted in the X100.
N
: The initialization of the X100 takes about 25 seconds. In its final steps the aircraft will
OTE
move its elevons up and down once.
The flight plan needs to be uploaded to the X100. There it is used by the X100 autopilot to
control the aircraft during flight.
1
Select UAV-01 from the Autopilot Control list.
2
Select default.fly and press >> in the Flight Files area.
S
R
TEP
2.0
Upload the flight plan to the X100
Color
red
green
:
A dialog appears to start the upload of the flight plan.
ESULT
— 124 —
Horizon
Description
There is no wireless (RF) link between the GCS
and the X100.
There is a wireless (RF) link between the GCS and
the X100.
12 October 2012