21.1.3
Collect and save the log files
P
REREQUISITES
●
GCS with log files located in the logs folder on the desktop
Always collect and save the following log files to a custom folder after each flight:
●
logyyyymmdd_hhmmss.fly
Used for image processing. The time stamp indicates the time of download.
●
logyyyymmdd_hhmmss.txt
Used for image processing. The time stamp indicates the time of download.
●
logyyyymmdd_hhmmss.text
Used for flight analysis and troubleshooting. The time stamp indicates the time of
download.
●
UAV-1-stdtlmyyyymmdd_hhmmss.txt
Used for flight analysis and troubleshooting. The time stamp indicates the start time of
the flight.
After each flight, a new set of log files must be downloaded. By saving them in a custom folder,
you can organize your sets of log files for image processing and you prevent them from being
overwritten.
1
Create a custom folder.
2
Click on the logs shortcut on the desktop of your GCS.
3
Look for the four specified files and copy them to the custom folder.
R
:
The log files are saved in the custom folder.
ESULT
21.2 Pictures
21.2.1
Remove the camera from the aircraft
P
REREQUISITES
●
X100 body with mounted Ricoh camera
1
Remove the top cover from the payload bay of the X100 body.
2
Remove the foam block securing the Ricoh camera in the camera compartment of the
payload bay.
3
Take out the Ricoh camera.
4
Disconnect the USB camera connector from the Ricoh camera.
2.0
After the flight
Pictures
— 185 —
12 October 2012