11.4 Mount the X100 on the launcher
P
REREQUISITES
●
Assembled launcher
●
X100 ready for flight
●
Crank (or torque wrench if available)
It is important to mount the launcher in a correct way to ensure a proper launch and take-off.
W
ARNING
1
Make sure the safety pin is properly inserted in the launch dock and launch slide.
2
Connect the crank to the tightening system.
N
: The crank must be connected to the head of the screw and not to the bolt or nut.
OTE
2.0
Launcher
Mount the X100 on the launcher
: Never perform a launch when the launcher is armed without the X100.
— 85 —
12 October 2012