Table of Contents
Advertisement
22.2.5
Obstacle clearances for descent
The obstacle clearance for descent requires that no obstacles appear in a zone above 25 m
HALP.
This zone extends over an area centered on the circuit entry point (beginning of the downwind
leg) with a radius of 150 m.
22.2.6
Obstacle clearances for landing
For the downwind and base leg, obstacle clearance requires that no obstacles appear in a
zone above 25 m HALP. For the final leg, obstacle clearance requires that no obstacles appear
in a zone defined as follows:
2.0
Safety
Obstacle clearances
— 194 —
12 October 2012
Advertisement
Table of Contents
