Safety; Definitions; Above Ground Level; Halp - Gatewing X100UAS System Manual

X100 system series
Table of Contents

Advertisement

22
S
AFETY

22.1 Definitions

22.1.1

Above ground level

AGL is the height Above Ground Level, where the level of the take-off location is considered
as the ground level.
22.1.2

HALP

HALP is the Height Above Landing Point. HALP is defined in Quickfield as the AGL height +
an offset value ( Advanced Settings tab). The offset value can be either positive or negative.
By default the offset value is 0.
22.1.3

Zone of operation

The zone of operation (ZoO) is the combination of the following zones:
The flight zone of the X100. This consists of the programmed flight path from launch until
landing.
A vertical safety zone of 60 m.
A horizontal safety zone of 1 km at each side of the flying zone.
22.1.4

A crash

Definition
A crash is an accident. An accident is an occurrence associated with the operation of an
aircraft in which:
a person is fatally or seriously injured
the aircraft sustains damage or structural failure
the aircraft is missing or completely inaccessible
2.0
— 191 —
12 October 2012

Advertisement

Table of Contents
loading

Table of Contents