Table of Contents
Advertisement
Seal the payload bay with the top cover
P
REREQUISITES
●
X100 body
●
Top cover with plastic screw
●
Flat-bladed screwdriver
1
Make sure no connectors or cables are hanging over the edge of the payload bay.
2
Place the top cover on the payload bay of the X100 body.
3
Using the flat-bladed screwdriver, secure the top cover with the plastic screw.
C
AUTION
2.0
X100 parts
X100 body parts
: Tighten it hand-tight, do not overstrain.
— 30 —
12 October 2012
Advertisement
Table of Contents
