21.2.2
Check the pictures on the camera
P
REREQUISITES
●
X100 after flight
●
Camera removed from the aircraft
It is important to check the quality of your pictures after a flight. If necessary, you have to repeat
the flight.
1
Check the quality of the pictures taken during the project:
●
Brightness on all pictures
●
Not too many blurry pictures
●
No dirt visible on pictures
R
:
If the quality of the pictures suffices, you can use them for file image processing. If
ESULT
not, recheck your camera settings and repeat the flight.
A
C
FTER
OMPLETING
local PC.
21.3 Clearing the site
21.3.1
Remove a battery from the X100
P
REREQUISITES
●
X100 body with mounted battery
1
Remove the top cover from the payload bay of the X100 body.
2
Disconnect the main power connector of the battery from the X100.
3
Remove the battery from the battery compartment in the payload bay.
21.3.2
Remove an eBox from the X100
P
REREQUISITES
●
X100 with mounted eBox
●
Ratcheting screwdriver
The eBox must be removed correctly from the X100.
1
Remove the two screws securing the eBox in the eBox bay.
2
Unplug the eBox from the eBox connector.
3
Disconnect the pressure connector from the pressure tube.
2.0
After the flight
Clearing the site
T
T
:
You can copy the pictures from the SD card to your GCS or
HIS
ASK
— 186 —
12 October 2012