Prepare The Camera Settings For Flight - Gatewing X100UAS System Manual

The GPS antenna needs to be screwed onto the eBox to ensure a locked GPS signal of the
X100.
1 Screw the GPS antenna clockwise onto the GPS antenna connector of the eBox.
N : Tighten it hand-tight, do not overstrain.
OTE
N : To remove the GPS antenna from the eBox, unscrew it counterclockwise.
OTE
19.5.3

Prepare the camera settings for flight

Before each flight, you have to check if the camera settings suffice for the current project or
need to be changed. Take pictures with different settings and compare them with each other.
You should strive for the best settings for the current situation (weather conditions, time of day,
...) and location:
Parameter
Focus
Shutter speed
ISO setting
Picture quality/size
Change picture quality/size
1 Press the MENU/OK button to enter the menu.
2 Picture Quality/Size is selected. Press right once to see the possible values.
3 Select F3648 (10M).
4 Press the MENU/OK button to confirm.
2.0
Prepare for flight
Preparation of the X100 for launch
Optimal
∞ (infinity)
1/1250 or higher
100
M
— 161 —
Minimal
∞ (infinity)
1/800
400
M
12 October 2012