Table of Contents
Advertisement
After a flight, the log files of the flight are still located in the memory of theX100. You need to
download them to your GCS for image processing and flight analysis.
1
Connect the download cable to the serial port on the GCS.
2
Connect the download cable to the download connector in the payload bay of the X100.
3
Open Datalog Viewer.
4
Choose File > Read Log File from Autopilot File from the menu bar.
S
R
TEP
5
Put the X100 in DOWNLOAD mode.
6
Select UAV2 via COM1 (19200 baud) in the dialog and click Select to confirm. The log
files are downloaded to the logs folder on the desktop of the GCS.
S
R
TEP
Once the download is finished, this is indicated in the dialog with the word FINISHED.
7
Close the dialog.
8
Disconnect the download cable from the GCS and the X100.
R
:
The log files are present in the logs folder on the desktop of the GCS.
ESULT
2.0
After the flight
:
A dialog appears to select the UAV.
ESULT
:
The log files are downloaded to the logs folder on the desktop of the GCS.
ESULT
— 184 —
Log files
12 October 2012
Advertisement
Table of Contents
