9.2
Screw the GPS antenna on the eBox
P
REREQUISITES
●
GPS antenna
●
eBox
The GPS antenna needs to be screwed onto the eBox to ensure a locked GPS signal of the
X100.
1
Screw the GPS antenna clockwise onto the GPS antenna connector of the eBox.
N
: Tighten it hand-tight, do not overstrain.
OTE
N
: To remove the GPS antenna from the eBox, unscrew it counterclockwise.
OTE
9.3
Screw the data link antenna on the eBox
P
REREQUISITES
●
Data link antenna
●
eBox
The data link antenna must be screwed onto the eBox to ensure a wireless (RF) link between
the GCS and the X100.
1
Click and screw the data link antenna onto the data link antenna connector of the eBox.
2.0
Antennas
Screw the GPS antenna on the eBox
— 68 —
12 October 2012