Figure 3-109: Start Software Upgrade Wizard Screen - AudioCodes MediaPack MP-124 User Manual

Notes:
To load files using the Software Upgrade Wizard:
1. Stop all traffic on the device using the Graceful Lock feature (refer to the warning
bulletin above).
2. Open the 'Software Upgrade Wizard' (Maintenance tab > Software Update menu >
Software Upgrade Wizard); the 'Software Upgrade Wizard' page appears.

Figure 3-109: Start Software Upgrade Wizard Screen

3. Click the Start Software Upgrade button; the 'Load a CMP file' Wizard page appears.
Note:
SIP User's Manual
•
Before upgrading the device, it is recommended that you save a copy of
the device's configuration settings (i.e., ini file) to your PC. If an upgrade
failure occurs, you can then restore your configuration settings by
uploading the backup file to the device. For saving and restoring
configuration, see ''Backing Up and Loading Configuration File'' on page
178.
•
Before you can load an ini or auxiliary file, you must first load a cmp file.
•
When you activate the wizard, the rest of the Web interface is
unavailable. After the files are successfully loaded, access to the full Web
interface is restored.
•
If you upgraded your cmp and the "SW version mismatch" message
appears in the Syslog or Web interface, then your Software Upgrade Key
does not support the new cmp version. Contact AudioCodes support for
assistance.
•
If you use the wizard to load an ini file, parameters excluded from the ini
file are assigned default values (according to the cmp file running on the
device), thereby, overriding values previously defined for these
parameters.
•
You can schedule automatic loading of these files using HTTP/HTTPS,
FTP, or NFS (refer to the Product Reference Manual).
At this stage, you can quit the Software Update Wizard, by clicking Cancel
, without requiring a device reset. However, once you start uploading a
cmp file, the process must be completed with a device reset. If you choose to
quit the process in any of the subsequent pages, the device resets.
176
MediaPack Series
Document #: LTRT-65415