Figure 5-65: Start Software Upgrade Wizard Screen - AudioCodes MediaPack MP-11X User Manual

SIP User's Manual
The Software Upgrade Wizard allows you to load the following files:
cmp (mandatory)
ini
Auxiliary files:
•
CPT (Call Progress Tone)
•
PRT (Prerecorded Tones)
•
FXS
•
FXO
•
USRINF (User Info)
Warning:
Notes:
To use the Software Upgrade Wizard, take these 10 steps:
Stop all traffic on the gateway (refer to the note above).
1.
Open the 'Software Upgrade Wizard' (Software Update menu > Software Upgrade
2.
Wizard); the 'Start Software Upgrade' screen appears.
Version 5.2
The Software Upgrade Wizard requires the gateway to be reset at the end
of the process, which may disrupt its traffic. To avoid this, disable all traffic on
the device before initiating the wizard by performing a graceful lock (refer to
'Locking and Unlocking the Gateway' on page 236).
•
When you activate the wizard, the rest of the Embedded Web Server
interface is unavailable and the background Web screen is disabled.
After the process is completed, access to the full Embedded Web Server
is restored.
•
The wizard allows you to load an ini or auxiliary file only after you have
loaded a CMP file.

Figure 5-65: Start Software Upgrade Wizard Screen

227
5. Web-based Management
August 2007