Control Panel Holder; Swing-Away Control Panel Holder With Removable Control Panel; Lap Belt; Fig. 45 Control Panel Holder, Swing-Away - Otto Bock Skippi plus Instructions For Use Manual

Accessories
Special functions, e.g. coupled electric
seat adjustment (back adjustment and
seat tilt)
Drive-away lock
Tab. 9 Information displayed on the LCD monitor
7.8

Control panel holder

7.8.1 Swing-away control panel holder with removable
control panel
The removable control panel can be pulled up and removed
from the control panel holder.
To allow the user to drive the power wheelchair closer to an
object or under the edge of a table, the control panel can be
folded aside with a special control panel holder:
1. Apply slight sideways pressure to the control panel
holder to release the pivot element.
2. Fold the control panel holder aside.
72 Ottobock
|
3. The pivot element locks in place again when the holder
is rotated back to the original position.
Fig. 45 Control panel holder, swing-away
7.9

Lap belt

WARNING
Risk of injury due to improper use of the lap belt. The lap
belt helps to stabilise the user sitting in the power wheel-
chair. Under no circumstances may the lap belt be used as
part of a restraint system for transportation in a motor vehi-
cle for the disabled.
Skippi plus