Attendant Control Overview; Ottobock - Otto Bock Skippi plus Instructions For Use Manual

Accessories
Fig. 37

Attendant control overview

1 On / Off button
2 Battery LED
3 Mode button
4 Mode LED
On/Off button (item 1)
The button is used to turn the power wheelchair on, to acti-
vate the drive-away lock (also see chapter 6.3.7), and to
turn the wheelchair off.
60

Ottobock

|
5 Display of the selected electric
seat function
6 Joystick
The control panel displays the following after the attendant
control is turned on:
Display symbol
Tab. 5 "Attendant control activated" display
Battery LED (item 2)
The battery LED lights up when the unit is on. Colour and
flash codes provide information on the current battery ca-
pacity status:
LED
Green is lit
Orange is lit
Red is lit
Red is flashing
Green is flashing
Information
Attendant control activated
Status
Battery capacity > 70%
Battery capacity 30%-70%
Battery capacity < 30%
Battery deep discharge -
charge immediately
Battery over-voltage (e.g.
after driving downhill) -
Continue driving slowly
Skippi plus