Battery Capacity" Indicator - Otto Bock Skippi plus Instructions For Use Manual

Operation
Only authorised specialist dealer service personnel can use
a handheld programming device, which is connected to the
control panel, to adapt the speed, acceleration and decel-
eration values to the individual wishes of the user.

6.3.5 "Battery Capacity" indicator

INFORMATION
Immediately after switching the power wheelchair on, the
battery indicator shows the battery capacity that was
saved before the wheelchair was last switched off. The
exact battery status is displayed after driving a short dis-
tance.
The battery indicator on the LCD monitor is divided into 7
segments that show the current battery capacity.
A charge of 100% corresponds to 7 segments on the bat-
tery symbol. As the remaining battery capacity decreases,
the LCD segments turn off one by one (see Table 1).
When the last segment flashes, the battery must be charged
immediately.
If all the segments have disappeared and the battery symbol
is flashing, the battery is under voltage. Since any further
48 Ottobock
|
use will lead to battery damage, a warning signal also ap-
pears.
If all segments of the battery symbol are flashing, this means
that the battery is over voltage. Since this will lead to battery
damage, a warning symbol also appears.
The charging process is indicated by the battery segments
lighting up one after the other. The driving function is locked
out while the battery is charging.
Display symbol Information
Driving menu with speed
level and battery capacity
Low battery capacity
Charging process with
drive-away lock
Battery is under voltage,
with warning symbol
Skippi plus