Batteries - Otto Bock Skippi plus Instructions For Use Manual

Operation
Display symbol
Tab. 4 Control panel display when the wheel lock is disengaged
INFORMATION
If the control unit does not indicate an error on the control
panel when the wheel lock lever is disengaged, this indi-
cates a malfunction which must be corrected by the spe-
cialist dealer promptly.
INFORMATION
All braking systems are deactivated once the wheel lock
release lever has been disengaged.
INFORMATION
The control unit may be switched off in push mode.
Engaging/activating the wheel lock
To engage the wheel lock, push the red wheel lock release
lever (Fig. 33) back until the safety pin clicks into place.
54 Ottobock
|
Information
Wheel lock is disengaged
The control unit activates the driving function again when
both wheel lock release levers are engaged.
6.5

Batteries

NOTICE
Risk of damage to the battery packs. The batteries are
encapsulated in battery packs at the factory. The battery
packs may not be opened, since this could cause irrevers-
ible damage to the encapsulated batteries or the battery
pack.
INFORMATION
Checking the remaining battery capacity and charging the
battery in time are essential in order to ensure the opera-
tional safety of your power wheelchair.
INFORMATION
Before doing any maintenance work on the batteries,
please read the battery manufacturer's warnings thor-
oughly. Observe the disposal information (see chapter 11).
The Skippi plus power wheelchair is equipped with two
maintenance-free 31 Ah (C20) / 27 Ah (C5) / 12 V-GEL bat-
Skippi plus