Drive-Away Lock Display - Otto Bock Skippi plus Instructions For Use Manual

Display symbol
Tab. 3 Display of the drive-away lock on the control panel
Activation via separate LCD monitor
If a special control is used, then the drive-away lock is acti-
vated via the separate LCD display. Select the menu item
"Drive-away lock" in the "Settings" menu. Activation is con-
firmed with an acoustic signal and the control unit is
switched off.
Fig. 32

Drive-away lock display

Skippi plus
Information
Drive-away lock
Deactivation via control panel
1. Press the On/Off button to turn the control unit on.
2. Push the joystick as far forward as possible until a
beep sounds.
3. Push the joystick as far back as possible until a beep
sounds.
4. Release the joystick. Another beep confirms deactiva-
tion of the drive-away lock.
5. The speed level and battery indicator are displayed.
The drive-away lock is deactivated and driving is enabled.
INFORMATION
The drive-away lock remains activated if the joystick is not
moved correctly. In order to deactivate the drive-away lock,
the control unit must be switched off again. The power
wheelchair can be switched on again and the drive-away
lock can be deactivated.
Deactivation via separate LCD monitor
An information screen is shown on the LCD monitor after the
power wheelchair is switched on. The deactivation process is
the same as described under "Deactivation via control panel".
Operation
Ottobock | 51