Safety Requirements For Transportation, Storage And Assembly - Otto Bock Skippi plus Instructions For Use Manual

INFORMATION
Only use original accessories supplied by the manufactur-
er. The optional components may only be mounted as de-
scribed here. Failure to comply will void the warranty.
INFORMATION
The serial number required for enquiries and orders can be
found on the rating plate (see chapter 2.9).
2.4 Safety requirements for transportation,
storage and assembly
Transportation and Storage
WARNING
Risk of accident and injury due to incorrect use for
transportation in a vehicle for the disabled. Use in a ve-
hicle for the disabled is only permissible if the following
options are used:
„ Standard Seat
„ mechanical back angle adjustment
„ mechanical seat tilt (tilt angle up to 20°)
„ electric seat tilt (tilt angle up to 20°)
Skippi plus
„ Seat height adjustment
„ Combined seat height adjustment / electric seat tilt
„ Combined seat height adjustment / mechanical back
angle adjustment
Versions with other options (e.g. electric back angle ad-
justment, mechanically elevating footrest) are not appro-
ved for use in a vehicle for the disabled.
WARNING
Risk of accident and injury due to improper use for
transportation in a motor vehicle for the disabled. The
power wheelchair may only be used for transportation in a
motor vehicle for the disabled if the safety components
(such as lap belt) which are offered by Ottobock and suit-
able restraint systems are used.
Observe the limitations regarding installed options (see
previous safety note).
Only one person may be transported in the power wheel-
chair at any one time. For optimum protection of the occu-
pant in case of an accident, use the seats and correspond-
ing restraint systems installed in a vehicle for the disabled
while it is in operation.
Safety
Ottobock | 11