Driving Function - Otto Bock Skippi plus Instructions For Use Manual

Operation
extended period of time. It is also possible to switch the
power wheelchair off with the On/Off button while driving. In
this case, the wheelchair brakes immediately until it comes
to a stop.
INFORMATION
The specialist dealer can use the parameter settings to
establish the user's desired default speed level or menu for
the power wheelchair after it is turned on.

6.3.4 Driving function

WARNING
Risk of accidents when driving without experience. In
order to avoid dangerous situations and falls, user and at-
tendant must first become familiar with the power wheel-
chair for children on level ground.
CAUTION
Risk of injury due to uncontrolled operation of the power
wheelchair. The power wheelchair controls should be
switched off whenever the driving function is not required.
This will prevent unintentional activation of the joystick.
46 Ottobock
|
CAUTION
Risk of injury due to tipping during operation. The follow-
ing safety measures must be observed when operating the
power wheelchair:
„ Operation is limited to inclines up to a maximum of 12 %.
„ When driving downhill, reduce speed according to the
steepness of the incline.
„ Do not cross obstacles with a difference in height > 5 cm.
„ Do not cross steps or curbs without reducing speed.
INFORMATION
The specialist dealer can use the parameter settings to
establish the user's desired default speed level or menu for
the power wheelchair after it is turned on.
The control unit of the power wheelchair switches to a safe
mode at elevated temperatures and after driving uphill for
extended periods of time, limiting the performance of the
power wheelchair. However, the user/attendant is able to
drive the power wheelchair out of a hazardous situation at
any time. The power wheelchair is fully functional again
once the unit has cooled down sufficiently (this may take
several minutes depending on the ambient temperature).
Skippi plus