Control Panel - Otto Bock Skippi plus Instructions For Use Manual

Operation
5
4
3
2
1
Fig. 30

Control panel

1 Joystick
2 Direction indicator, left
3 Warning flasher
4 LCD Display
5 On/Off Button
6 Mode button
Pressing the mode key briefly increases the speed level. Af-
ter reaching the maximum speed level, you can change
back to speed level 1 by pressing the button again (1-2-3-4-
5-1-...). Pushing and holding the button for at least 2 sec-
onds switches the control unit to the "Electric seat function"
menu.
44 Ottobock
|
6
7
8
12
9
7 Horn
8 Direction indicator, right
9 Light
10 Charging / programming receptacle
11 Connector for external On/Off button
12 Connector for external mode button
Horn
The horn will sound as long as the horn button is being
pressed.
10
Warning flasher
11
Pressing the warning flasher button activates or deactivates
all four direction indicator lights.
Light
The front and rear lights are activated and deactivated by
pressing the light button.
Direction indicator lights
The right or left front and rear direction indicator lights are acti-
vated and deactivated by pressing the respective "direction
indicator, right" or "direction indicator, left" buttons. The direc-
tion indicator lights turn off automatically after 20 seconds.
LCD Display
The LCD display is the communication interface between
the user and the control unit. It indicates the selected speed
level, the remaining battery capacity and the status of elec-
tric options and special functions as well as warnings and
errors. All display symbols are visible during the initialisation
phase.
Skippi plus